L 30/32 Official Journal of the European Union EN 31.1.2019 ANNEX III LIST OF GOODS REFERRED TO IN ARTICLE 11 Introductory Note: The CN codes in this Annex refer to codes specified in Part Two of Annex I to Regulation (EEC) No 2658/87. Where ‘ex’ precedes the CN code, the goods covered by this Regulation constitute only a part of the scope of the CN code and are determined by both the description given in this Annex and the scope of the CN code. Notes: 1. The object of the controls contained in this Annex should not be defeated by the export of any non-controlled goods (including plant) containing one or more controlled components when the controlled component or components are the principal element of the goods and can feasibly be removed or used for other purposes. NB: In judging whether the controlled component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the controlled component or components as the principal element of the goods being procured. 2. In some instances chemicals are listed by name and CAS number. The list applies to chemicals of the same structural formula (including hydrates) regardless of name or CAS number. CAS numbers are shown to assist in identifying a particular chemical or mixture, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers. CN code Description 1. ex 7326 ex 7616 ex 8301 ex 3926 ex 4203 ex 4203 ex 4205 ex 6217 ex 6307 90 99 50 90 30 40 00 10 90 98 90 00 97 00 00 90 00 98 Goods designed for restraining human beings, as follows: 1.1. Shackles and gang chains Notes: 1. Shackles are restraints consisting of two cuffs or rings fitted with a locking mechanism, with a con­ necting chain or bar 2. This item does not control the leg restraints and gang chains prohibited by item 2.3 of Annex II 3. This item does not control ‘ordinary handcuffs’. Ordinary handcuffs are handcuffs hich meet all the following conditions: — their overall dimension including chain, measured from the outer edge of one cuff to the outer edge of the other cuff, is between 150 and 280 mm when both cuffs are locked; — the inside circumference of each cuff is a maximum of 165 mm when the ratchet is engaged at the last notch entering the locking mechanism; — the inside circumference of each cuff is a minimum of 200 mm when the ratchet is engaged at the first notch entering the locking mechanism; and — the cuffs have not been modified to cause physical pain or suffering. ex 7326 ex 7616 ex 8301 ex 3926 ex 4203 ex 4203 ex 4205 ex 6217 ex 6307 90 99 50 90 30 40 00 10 90 98 90 00 97 00 00 90 00 98 1.2. Individual cuffs or rings fitted with a locking mechanism, having an inside circumference exceed­ ing 165 mm when the ratchet is engaged at the last notch entering the locking mechanism Note: This item includes neck restraints and other individual cuffs or rings fitted with a locking mechanism, which are linked to ordinary handcuffs by means of a chain